Service Email: Got a Question? Send us an email. Most emails are replied to same day.

service@imaconline.ca or call our office at: 905-760-7623

WINTER IS FAST APPROACHING                  >>> HUMIDITY ALERT <<<<
RECOMMENDATIONS FROM MANUFACTURES ARE 40-60% Relative Non Condensing.

Get your printer tuned up for the days ahead...

General Printer Cleaning: Models include, Mutoh Falcon II Outdoor Series, Spirfire Exreme 100, ValueJet / HP5000 & HP5500. Ask for details and pricing.

Printing Tips:

" Bronzing". You can minimize or even stop the bronzing effect by reducing the amount of black ink you use when printing. Typically this can be done with image editing software such as Adobe Photoshop™. Bronzing occurs when the ingredient which turns the ink cyan, magenta, black or yellow is too large to absorb into the paper so it stays on the top to form a dry film surface.

" Coalescence". Again you can minimize or even stop this effect by slowing down the speed of the printer. Normally, you can slow the printer speed down changing the printer settings to the high quality printer mode. With some printers the film mode will also slow down the printing speed. Coalescence occurs because the ink is absorbed into the paper at a slower rate than the printer is jetting the ink.

" Matting". You can minimize or even stop matting by reducing the amount of black ink being used. Typically this can be done with image editing software such as Adobe Photoshop™. Matting occurs when the ink does not fully enter the receiving layer.

GENERAL TIPS

• The glossy side of the paper is the printing surface. Follow the printer manufacturer's instructions for loading the media correctly.
• Avoid handling the unprinted media on the printing surface. Smudges, marks etc can affect the image and colour quality.
• Avoid exposing the media to extremes of temperature and humidity; high humidity can reduce the image quality.
• Store the media in the original packaging to prevent accidental damage to the printing surface.
• Printed media can be handled immediately. However, it should be fully dried before stacking or storing.

Profiling: Imaging Alignment Corp believes that the best profile you can have is made at your location with your printer and in your environment. Call for Pricing and information!

Public FTP Access (for customer use only) Using a Ftp client like filezilla, use the following information.

Url: ftp.imaconline.ca
User: imac_g
Pword: password

Using a web browser, copy and paste this link.

ftp://imac_g:password@www.imaconline.ca